Weldbond Multi-Surface Glue Non Toxic for Mosaic Wood Ceramic Craft 5.4oz
10 sold in last 24 hours
- CREATE BUILD BOND Weldbond is a versatile strong glue that bonds a wide range of materials including wood, ceramic, glass, tile, pottery, porcelain, fabric and carpet. Whether you are working on DIY crafts, mosaic art or wood repair, this multi-surface adhesive gives you a secure, long-lasting hold from one bottle instead of a shelf full of single-job glues.*Does not bond Metal with Ceramic
- THE MOSAICS GLUE: Weldbond Multi Surface glue works perfectly on mosaics, pottery, tiles and porcelain for your crafts; Clean both faces, apply a thin coat, press together and let it set, and it dries clear so the join does not show on a glazed or light surface; It is a bonding adhesive rather than an instant glue, so a repair needs to sit undisturbed while it sets.
- NON-TOXIC SAFE FOR EVERYONE: No solvents and no harsh fumes, so it earns a place at the kitchen table, in the classroom or in a small studio with the windows shut. Each bottle of clear multi-purpose adhesive, enough for a full panel of mosaics or a season of repairs around the house.
- DRIES CRYSTAL CLEAR: The white glue turns invisible as it sets, so seams vanish on glass, acrylic, porcelain and light-toned wood. No yellowing, no cloudy halo around the joint, nothing to sand back or paint over. The finished bond is water resistant, so both indoor pieces and covered outdoor work hold their shape season after season.
- EASY TO USE ON WOOD, INDOOR OR OUTDOOR: The heavy-duty formula holds its shape and the precision tip lays a neat bead instead of flooding the piece. It dries in about 20 minutes with no clamping, then sands and paints like the wood around it. Need it thinner for porous work? Add a little water and brush it on as a primer or sealer.
Estimated shipping
Select a product to estimate shipping.Non-Toxic Multi-Surface Glue That Bonds Anything! Use as Wood Glue or for Glass Mosaic Ceramic Pottery Craft Tile Porcelaine Stone Jewelry Fabric Furniture & More. 1-Pack
Wood
Bonds almost any type of wood to itself and to many other materials.Apply full-strength. Lightly coat both surfaces. If wood is not warped, light clamping is best. For end-grain gluing, send us an email and we will send the nitty gritty details. (Or, NGDs, as we call them.) Sets in 20 minutes. Achieves strong bond in 1 hour. Cures in 24 hours. Bonded joint will accept a stain while glue is still wet.Bonded joint is paintable and stronger than the actual wood! Not intended for construction of laminated structural beams, melamine, or oily woods.
Tiles
Weldbond is great for all kinds of tiles, like ceramic, marble, porcelain, granite, composite materials like Corian, clay, cork, quartz, glass, slate, stone or human hair. (Just seeing if you’re still paying attention.) First, seal all porous surfaces, using the sealing mixture of 5 parts water to 1 part Weldbond and place in position. You have about 10 minutes of positioning time at this point. Use tape to hold in place for 1 hour. Allow to dry 24 hours before grouting. For uneven surfaces, again just drop us an email and ask for the “General Adhesive Mix” and again, we’ll give you those nitty gritty details, pronto.
Glass, Stained Glass, Clear Glass, Glass Tile...
(In case you’re not catching on, it glues “Anything Glass”.) Dries clear. Adheres glass to glass or glass to many other surfaces. Step 1: Seal all pieces of glass with the mixture (5 parts water to 1 part Weldbond). For larger pieces, seal only one side that you wish to adhere. Let dry approximately 1 hour. Step 2: Apply Weldbond full strength. Allow to become tacky before bringing together, approximately 1 minute. Use sparingly. Lightly clamp or tape material in position until fully cured. (Minimum 24 hours or more depending on room temperature or humidity. Eg. Drying time in the desert is quicker than say, in the jungle.) Whiteness indicates that curing is not complete. Crystal-clear dry may take up to 30 days.
Sealing, Priming, Dust Proofing
Weldbond is both a sealer and a priming coat for porous surfaces (ie. Concrete, masonry, brick and mortar, drywall, and more.)Great for sealing in concrete dust in basements and garages.Checks efflorescence on brick floors and block. Paintable.Test first to ensure surface is porous. Mix 1 part Weldbond with 5 parts water and brush, spray or roll over surface. Creates a matte finish.Coverage: 3 litres of Weldbond, once diluted, covers 165 square meters (1783 square feet), based on drywall application tests.Note: Do not repeat. For sealing concrete floors, leave an unsealed 1 inch breathing area around perimeter. For efflorescence, clean brick, and block first with a wire brush. *Not recommended for interlocking brick or areas with standing water.
Concrete Bonding, Hardening and Sealing
Add to concrete and increase sheer strength and compression strength.
For strengthening and hardening. Concrete blended with Weldbond withstands heavy wear and vibration. Mix 1 part Weldbond with 10 parts water, and use as the water portion of your premixed concrete. Follow the concrete manufacturers instructions. You can also use Weldbond in coloured cement or decorative concrete...if you like that sort of thing.
Or, use as a Bonding Agent.
Bond new concrete to old. Repair cracked or flaking surfaces. Trowel out to a featheredge. ASTM C1059 certified.
Step 1: If required, seal the surface. (using 5 parts water and 1 part Weldbond). Allow 1 hour to dry.
Step 2: Apply a coat of 3 parts Weldbond and 1 part water. While this is still tacky, pour wet cement mixture on top.
Weldbond has been tested to be non-toxic. Weldbond conforms to ASTM d4236.(June 09, 2015; Bureau Veritas)
Weldbond Certified by the Ecologo certification program. The Ecologo certification program was aquired by UL environment, a division of UL (Underwriters Laboratories) in 2010. Ecologo certification is based on multi-attribute, life cycle–based standards. All products certified to an Ecologo standard must meet or exceed each of the listed criteria before receiving the mark. Product certified for reduced environmental impact. View specific attributes evaluated: UL2762. (Certified since 2010, renewed annually Nov 10)
Product details
| Main Specification | |
|---|---|
| Usi specifici per il prodotto | Craft or Glass or Stones & Foam or Mosaics & Ceramics or Tiles & Porcelain or Wood & Woodworking |
| Materiale compatibile | Vetro or Ceramica or Pietra or Porcellana |
| Produttore | Frank T Ross and Sons |
| Conteggio unità | 5.4 Fluid Ounces |
| Oggetto | Liquidazione |
| Marca | Weldbond |
| UPC | 058951501602 |
| Tempo pieno | 24 Hours |
| Livello di resistenza all'acqua | Resistente all'acqua |
| Quantità del pacchetto dell'oggetto | 1 |
| Componenti inclusi | Weldbond - 8-50160 |
| Numero di pezzi | 1 |
| Colore | Libero |
| Numero di identificazione commerciale globale | 00058951501602 |
| Articolo Peso | 3.2. |
| Product information | |
| Volume | 5.4 fluid ounces |
| Technical Details | |
| Numero della parte | Weldbond - 8-50160 |
| Modello | WELDBOND 5.4oz / 160ml |
| Tipo di materiale | Polyvinyl Acetate (PVA) |
| Livello di viscosità | High |
| Item details | |
| Nome dell'oggetto | Weldbond - 8-50160 |
| Others | |
| Altre caratteristiche speciali del prodotto | Non tossico or Asciugatura rapida or Dries Clear or Giallo resistente or Sandable |
| Tipo di prodotto | Weldbond - 8-50160 |
| Tipo di contenitore | Bottiglia |