Automatic Vacuum Switch for Power Tools, Etoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload, Eliminating Circuit Breaker Tripping
4 sold in last 24 hours
- Unique Current Sensing Technology. If the tool motor connected to the 'A' port exceeds 30W, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time
- Make the Work More Effective. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems
- Suitable for Most Medium Duty Workloads. Etoolcity automatic vacuum switch has a starting threshold of approximately 0.25 amps(30watts at 120V and 60watts at 220V), perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum
- More Safety. Adopting high-cost, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W. The switch's shell has PC+ABS V0 grade flame retardant material, it is more reliable and safe to protect work
- Two Installation Methods. You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Both ways are very strong
Estimated shipping
Select a product to estimate shipping.Why You Need a Automatic Vacuum Switch
It eliminates the distraction of reaching for a vacuum while working with potentially dangerous power tools.
It ensures that dust and debris are collected as you cut, as opposed to being cleaned up with greater difficulty after the mess has been made.
It minimizes hazardous airborne dust which can lead to a variety of ailments.
Retaining the proven reliability of our Etoolcity technology, the automatic dust controller switch is the latest Version of the Etoolcity Vacuum Autoswitch -an essential device in workshops and on job sites for more than a decade.
THE NEW ETOOLCITY AUTOSWITCH FEATURES
New Current Sensing Technology and Actuation Threshold
Supports a Wide Range of Cutting Tools from Rotary Handheld Devices to Large Shop Saws
Prevents Circuit Overload with an Auto Turn-On Vacuum Delay
Runs the Vacuum Only While You’re Using Your Tool So You Save Time and Electricity
Automatically Delays Vacuum Turn-Off by 7 Seconds to Continue to Clear the Air While the Motor Spins Down
Helps to Comply with OSHA Requirements for Dust Control
Highlights of the Etoolcity Autoswitch:
STARTUP DELAY- Controls in-rush current to help avoid circuit overload
AUTO MODE- Turns the vacuum on automatically with the power tool
SHUTOFF DELAY- Allows time for the vacuum to clear the hose of debris
POWER TOOL OUTLET
Tool Outlet Connection: 2 or 3 prong plug
Max. motor rating should not exceed 120V/15A or 220V/10A, 50/60Hz, 1875W
ACCESSORY OUTLET
Any standard shop type vacuum will run on the Etoolcity Autoswitch
Vacuum motor HP should not exceed 1875W
Dust collector motor should be rated at 120V/15A or 220V/10A and HP should not exceed 1875W
Power Feeders can also be controlled
Focus On Your Work:
Save time
Minimize airborne dust Reduce
Cleanup
ELECTRICAL SPECIFICATIONS Outlet Required:
Standard 120V/15A or 220V/10A,50/60Hz Outlet
Input Connection: 3prong(grounded)male
'A' Port Power Rating: 120V/15A or 220V/10A,50/60Hz
'B' Port Power Rating: 120V/15A or 220V/10A,50/60Hz
Actuation Threshold: ~0.25 Amps(about 30W at 120V)
P ackage Included:
1x Automatic vacuum switch with 15'' power cord
2x Mounting screws
1x Installation instruction
1x Strong nano-markless hook sticker
Product details
| Main Specification | |
|---|---|
| Produttore | Etoolcity |
| Conteggio unità | 1 conteggio |
| Metodo di controllo | Toccare |
| Specificazione Met | UL |
| Materiale di contatto | Metallo |
| Tipo di contatto | Normalmente aperto |
| Valutazione attuale | 15 A |
| Tensione di funzionamento | 120 Volt |
| Terminal | Plug |
| Tipo di circuito | 1-way |
| Tipo di attuatore | Rotary |
| Marca | Etoolcity |
| UPC | 743815173360 |
| Tipo di controllo | Pieno |
| Numero di articoli | 1 |
| Modalità di funzionamento | AUTO |
| Dispositivi compatibili | Power Tools (Miter Saws, Table Saws, Power Sanders, Routers, etc.) |
| Potenza | 1800 watt |
| Colore | Nero |
| Tipo di connettore | Plug In |
| Tipo di montaggio | Plug In Mount |
| Product information | |
| Tipo di interruttore | Rotary |
| Technical Details | |
| Numero della parte | ec |
| Modello | LF40-HVC01 |
| Tipo di materiale | Plastica |
| Valutazione della protezione internazionale | Ip54 |
| Numero di posizioni | 2 |
| Protocollo di connettività | X-10 |
| Measurements | |
| Dimensioni articolo | 2 x 1 x 1 inches |
| Others | |
| Tipo di prodotto | Power Tools Replacement Parts |